Energy Saving Crimping Pliers
* All the key parts in all the engergy saving crimping toos., have been treated by special hardening and quality control so that it can last long time.
| AP-03C |  |
 |
|
| 1, Put the terminal in relevant tool month firstly | |
 |
|
| 2, Then put the stripped insulated conductor into the terminal | |
 |
|
3, Press gradually and crimping well |
Model |
Range or application |
Capacity mm2 |
AWG |
Length mm |
Weight kg |
AP-03C |
 Insulated cable links+butt connectos |
0.5-6.0 | 20-10 | 250 |
0.55 |
| AP03B | AP30J |
 |
 |
| AP04WFL | AP-02H |
 |
 |
| AP-26TW | AP-457 |
 |
 |
Model |
 |
|
 |
|
 |
|
AP-02H |
6.5MM |
5.4MM |
1.72MM |
|||
55, 58, 59, 62, 140, 142, 223, 303, 400, FIBER OPTIC, BELDEN 8279 |
||||||
AP-02H1 |
6.5MM |
5.4MM |
3.25MM |
2.0MM |
1.72MM |
1.0MM |
55, 58, 59, 62, 8X, 140, 141, 174, 210, 223, 303, 400, FIBER OPTIC, BELDEN 8279 |
||||||
AP-05H |
8.1MM |
6.5MM |
5.4MM |
2.6MM |
1.72MM |
|
58, 59, 62, 5, 6, 21, 140, 141, 143, 210, 222, 223, 303, 304, 400 BELDEN 8279, 8281, 9231, 9141 |
||||||
AP457 |
11MM |
8.2MM |
5.4MM |
|||
4C, 5, 7C, CABLE |
||||||
Model |
Range or application |
Capacity mm2 |
AWG |
Length mm |
Weight kg |
AP-03B |
 Non-insulated plugs connectors |
1.0-4.0 |
20-12 |
250 |
0.55 |
AP-26TW |
 Wire-end ferules |
2x0.5-6 |
2X20-20 |
||
AP-04WFL |
0.5-4.0 |
20-13 |
|||
AP-30J |
Insulated cable links+butt connectos |
0.5-6.0 |
22-10 |
| AP-10 | AP05FL/AP-06FL |
 |
 |
 AP-06FL Operation Diagram |
|
| AP-101 | AP-103 |
 |
 |
| AP-07FL | Crimping Range: 1-1.25 mm2 ¡¡Crimping Range: 1-1.25 mm2 |
 |
 |
Model |
Range or application |
Capacity mm2 |
AWG |
Length mm |
Weight kg |
AP-101 |
 Non-insulated cable links |
1.0-10.0 |
17-7 |
250 |
0.55 |
AP-10 |
1.5-6.0 |
22-10 |
|||
AP-103 |
 Crimping cap(For insulated closed terminals) |
1.0-6.0 |
17-10 |
||
AP-05FL |
 Lug connectors and non-insulated plug connectors |
4.8mm |
3 |
||
AP-06FL |
6.3mm |
6 |
|||
AP-07FL |
 Flag female insulating joint |
1.5-2.5 |
22-13 |
| LAS-005 | |
| Engergy saving crimping pliers LAS-005, is applicable for non-welding pre-insulated terminals. It meets standard electric connection and accurate crimping die without screw fixing. Only pushing ahead you could replace crimping die. The operation is esy and convenient. The handles for LAS-005 are complied with the principle of human being and enginering. Moreover, there are two extra crimp dies existing between the handles to be taken easily and directly. |
|
  |
  |
Model |
Range or application |
Capacity mm2 |
AWG |
Length mm |
Weight kg |
LAS-005 |
|||||
B |
Insulated cable links+butt connectors |
0.5-6.0 |
20-10 |
230 |
0.68 |
W |
Wire-end ferrules |
0.5-6.0 |
20-10 |
||
N |
Non-insulated cable links |
0.3-8.0 |
20-7 |
| KA-8162 | KA-8161 |
 |
 |
| KA-8163 | |
 |
|
| KA-8164 | KA-8165 |
 |
 |
Model |
Range or application |
Capacity mm2 |
AWG |
Length mm |
Weight kg |
kA-8161 |
Insulated cable links+butt connectors |
0.5-6.0 |
20-10 |
220 |
0.54 |
KA-8162 |
Non-insulated cable links |
1.0-10.0 |
17-7 |
||
KA-8163 |
Crimping cap(For insulated closed terminals) |
1.0-6.0 |
17-10 |
||
KA-8164 |
Non-insulated plugs connectors |
1.0-6.3 |
20-10 |
||
KA-8165 |
Wire-end ferrules |
0.5-6.0 |
20-10 |