Waterproof, Dustproof and Moistureproof Fluorescent Lamp

T8F Series
V3118F V3136F V3158F
V3218F V3236F V3258F

Features:

  • Natural silicone gel seal gasket adopted and tight PC or stainless steel lock for lamp body to diffuser for good waterproof function and IP65 grade
  • Imported high quality ABS or PC for lamp body and PC for diffuser for heavy impact and much longer Life
  • PC clips for laying out of wire for electrical safety - Prismatic design of diffuser to get average ray, efficient usage of light and good dazzle-proof effect
  • Direct pulsion and rotation installation for tubes to guarantee safe and reliable replacing tube and convenient maintenance
  • Easy and quick to install fixtures under ceiling or on surface
  • Curve,round and sleek of corners and edges for elegant and functional appearance Integral and smooth body for a easy cleaning

    V3XXXF IP65
    Manual for installation and operation of High-grade waterproof fluorescent lamp
    MANUAL AND INSTRUCTIONS FOR INSTALLTION AND OPERATION

    Characteristics:

    • The lampshade can create soon photoelectric effects with quality plastic by nature and multi-reflective sides.
    • The lamp body is made from imported quality carbonic acid polyester and good in solidity and durability.
    • Reflective plat or appliance board is made of steel plate or stainless steel movingly dusted over with powder, novel and easy for maintenance
    • Both ends of the lamps are designed with wire-inRubber caps, wire specification:H05RNF3 × 0.1mm 2
    • Fixing sector is on the bottom, which can be fixed on the ceil or linked with a chain.
    • The lamp is attached with sealed rings and tightening locks, which can reach IP65 stand if appropriately installed.
    • The product is in line with GB7000.1 and GB13037 standards.
    • With F signs, it can be fixed on any common combustible surfaces.
    • It is power factor can reach over 0.85
    • High-efficiency electronic or energy conserving sensitive ballast are applicable
    • Locks for tightening lampshades made of intensified plastic and stainless steel.
    • Fuse box is for provision when required
    • Fluorescent lighting tube is not included.

    Purchase information
    Model
    power
    Lenght
    mm
    Width
    mm
    Height
    mm
    LF
    mm
    Weight Kg
    V3118F
    1×18W
    670
    102
    110
    480
    1.47kg
    V3218F
    2×18W
    670
    162
    110
    480
    1.88kg
    V3136F
    1×36W
    1274
    102
    110
    890
    2.18kg
    V3236F
    2×36W
    1274
    162
    110
    890
    3.79kg
    V3158F
    1×58W
    1574
    102
    110
    1000
    3.07kg
    V3258F
    2×58W
    1574
    162
    110
    1000
    4.83kg
    MODEL
    W.
    Lamp
    A
    B
    C
    D
    Lampholder
    V3118F
    1 × 18W
    T8
    480
    670
    110
    102
    G13
    V3136F
    1 × 36W
    T8
    890
    1274
    110
    102
    G13
    V3158F
    1 × 58W
    T8
    1000
    1574
    110
    102
    G13
    V3218F
    2 × 18W
    T8
    480
    670
    110
    162
    G13
    V3236F
    2 × 36W
    T8
    890
    1274
    110
    162
    G13
    V3258F
    2 × 58W
    T8
    1000
    1574
    110
    162
    G13
    POWER
    1 × 18W
    2 × 18W
    1 × 36W
    2 × 36W
    1 × 58W
    2 × 58W
    N ° clips
    4
    8
    16
    Installation

    T8D Series
    V3118 V3136 V3158
    V3218 V3236 V3258

    Features:

  • Natural silicone gel seal gasket adopted and tight PC or stainless steel lock for lamp body to diffuser for good waterproof function and IP65 grade
  • Imported high quality ABS or PC for lamp body and PC for diffuser for heavy impact and much longer Life
  • PC clips for laying out of wire for electrical safety - Prismatic design of diffuser to get average ray, efficient usage of light and good dazzle-proof effect
  • Direct pulsion and rotation installation for tubes to guarantee safe and reliable replacing tube and convenient maintenance
  • Easy and quick to install fixtures under ceiling or on surface
  • Curve,round and sleek of corners and edges for elegant and functional appearance
  • Integral and smooth body for a easy cleaning

    V3XXX IP65
    Manual for installation and operation of High-grade waterproof fluorescent lamp
    MANUAL AND INSTRUCTIONS FOR INSTALLTION AND OPERATION

    Characteristics:

    The lampshade can create soon photoelectric effects with quality plastic by nature and multi-reflective sides.
    • The lamp body is made from imported quality carbonic acid polyester and good in solidity and durability.
    • Reflective plat or appliance board is made of steel plate or stainless steel movingly dusted over with powder, novel and easy for maintenance
    • Both ends of the lamps are designed with wire-inRubber caps, wire specification:H05RNF3 × 0.1mm 2
    • Fixing sector is on the bottom, which can be fixed on the ceil or linked with a chain.
    • The lamp is attached with sealed rings and tightening locks, which can reach IP65 stand if appropriately installed.
    • The product is in line with GB7000.1 and GB13037 standards.
    • With F signs, it can be fixed on any common combustible surfaces.
    • It is power factor can reach over 0.85
    • High-efficiency electronic or energy conserving sensitive ballast are applicable
    • Locks for tightening lampshades made of intensified plastic and stainless steel.
    • Fuse box is for provision when required
    • Fluorescent lighting tube is not included.

    Purchase information
    Model
    power
    Lenght
    mm
    Width
    mm
    Height
    mm
    LF
    mm
    Weight Kg
    V3118
    1×18W
    660
    86
    90
    350
    1.35
    V3218
    2×18W
    660
    136
    90
    350
    1.65
    V3136
    1×36W
    1270
    86
    90
    900
    1.75
    V3236
    2×36W
    1270
    136
    90
    900
    2.05
    V3158
    1×58W
    1570
    86
    90
    1200
    2.25
    V3258
    2×58W
    1570
    136
    90
    1200
    2.55
    MODEL
    W.
    Lamp
    A
    B
    C
    D
    Lampholder
    V3118
    1 × 18W
    T8
    350
    660
    86
    90
    G13
    V3136
    1 × 36W
    T8
    900
    1270
    86
    90
    G13
    V3158
    1 × 58W
    T8
    1200
    1570
    86
    90
    G13
    V3218
    2 × 18W
    T8
    350
    660
    136
    90
    G13
    V3236
    2 × 36W
    T8
    900
    1270
    136
    90
    G13
    V3258
    2 × 58W
    T8
    1200
    1570
    136
    90
    G13
    POWER
    1 × 18W
    2 × 18W
    1 × 36W
    2 × 36W
    1 × 58W
    2 × 58W
    N ° clips
    6
    8
    10
    Installation

    T8B Series
    V3118B V3136B V3158B
    V3218B V3236B V3258B

    Features:

  • Natural silicone gel seal gasket adopted and tight PC or stainless steel lock for lamp body to diffuser for good waterproof function and IP65 grade
  • Imported high quality ABS or PC for lamp body and PC for diffuser for heavy impact and much longer Life
  • PC clips for laying out of wire for electrical safety - Prismatic design of diffuser to get average ray, efficient usage of light and good dazzle-proof effect
  • Direct pulsion and rotation installation for tubes to guarantee safe and reliable replacing tube and convenient maintenance
  • Easy and quick to install fixtures under ceiling or on surface
  • Curve,round and sleek of corners and edges for elegant and functional appearance Integral and smooth body for a easy cleaning

    V3XXXB IP65
    Manual for installation and operation of High-grade waterproof fluorescent lamp
    MANUAL AND INSTRUCTIONS FOR INSTALLTION AND OPERATION

    Characteristics:

    • The lampshade can create soon photoelectric effects with quality plastic by nature and multi-reflective sides.
    • The lamp body is made from imported quality carbonic acid polyester and good in solidity and durability.
    • Reflective plat or appliance board is made of steel plate or stainless steel movingly dusted over with powder, novel and easy for maintenance
    • Both ends of the lamps are designed with wire-inRubber caps, wire specification:H05RNF3 × 0.1mm 2
    • Fixing sector is on the bottom, which can be fixed on the ceil or linked with a chain.
    • The lamp is attached with sealed rings and tightening locks, which can reach IP65 stand if appropriately installed.
    • The product is in line with GB7000.1 and GB13037 standards.
    • With F signs, it can be fixed on any common combustible surfaces.
    • It is power factor can reach over 0.85
    • High-efficiency electronic or energy conserving sensitive ballast are applicable
    • Locks for tightening lampshades made of intensified plastic and stainless steel.
    • Fuse box is for provision when required
    • Fluorescent lighting tube is not included.

    Purchase information
    Model
    power
    Lenght
    mm
    Width
    mm
    Height
    mm
    LF
    mm
    Weight Kg
    V3118B
    1×18W
    660
    100
    110
    416
    1.9
    V3218B
    2×18W
    660
    150
    110
    416
    2.4
    V3136B
    1×36W
    1270
    100
    110
    880
    2.8
    V3236B
    2×36W
    1270
    150
    110
    880
    4.6
    V3158B
    1×58W
    1570
    100
    110
    1180
    3.6
    V3258B
    2×58W
    1570
    150
    110
    1180
    5.6
    MODEL
    W.
    Lamp
    A
    B
    C
    D
    Lampholder
    V3118B
    1 × 18W
    T8
    416
    660
    110
    100
    G13
    V3136B
    1 × 36W
    T8
    880
    1270
    110
    100
    G13
    V3158B
    1 × 58W
    T8
    1180
    1570
    110
    100
    G13
    V3218B
    2 × 18W
    T8
    416
    660
    110
    150
    G13
    V3236B
    2 × 36W
    T8
    880
    1270
    110
    150
    G13
    V3258B
    2 × 58W
    T8
    1180
    1570
    110
    150
    G13
    POWER
    1 × 18W
    2 × 18W
    1 × 36W
    2 × 36W
    1 × 58W
    2 × 58W
    N ° clips
    6
    10
    12
    Installation
    		•

    • Yueqing Langir Electric Co.,Ltd. | SunShine Electric. Co.,LTD. Tel: 86-577-62737672 Mobile: 86-13706605914 Fax: 86-577-62737671 E-mail: sunshine@sunshinele.com