Heater/ Regulator and Monitoring/ Room Thermostat
 Regulator and Monitoring |
 Heater |
 Room Thermostat |
Heater |
 |
PTC Heater HG 140
 |
|
Technical Data
| Operating voltage | 120-240V AC/DC* (min. 110V, max. 265V) |
| Heating element | PTC resistor, self regulating and temperature limiting |
| Heater body | extruded aluminium profile, anodised |
| Connection | 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end ferrule) and rigid wire 0.5- 2.5mm² |
| Connection casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 50022 |
| Fitting position | vertical |
| Operating/Storage temperature | -45 to +70 °C (-49 to +158 °F) |
| Protection type/Protection class | IP20 / I (earthed) |
| Approvals | VDE + UL File No. E150057 |
| Accessoires | screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%. |
|
| Part No. | Power* | Max. current** | Length | Weight |
| 14000.0-00 | 15W | 1.5A | 2.6"/65mm | 0.66 lbs (0.3 kg) |
| 14001.0-00 | 30W | 3.0A | 2.6"/65mm | 0.66 lbs (0.3 kg) |
| 14003.0-00 | 45W | 3.5A | 2.6"/65mm | 0.66 lbs (0.3 kg) |
| 14005.0-00 | 60W | 2.5A | 5.5"/140mm | 1.10 lbs (0.5 kg) |
| 14006.0-00 | 75W | 4.0A | 5.5"/140mm | 1.10 lbs (0.5 kg) |
| 14007.0-00 | 100W | 4.5A | 5.5"/140mm | 1.10 lbs (0.5 kg) |
| 14008.0-00 | 150W | 9.0A | 8.7"/220mm | 1.76 lbs (0.8 kg) |
*at 68°F (20°C) ambient temperature
**Inrush current
Dimensioned Drawing
Small PTC Heater HGK 047
 |
|
Technical Data
| Heating element | PTC resistor, self regulating and temperature limiting |
| Heater body | extruded aluminium profile, anodised |
| Mounting | clip for 35mm DIN rail, EN 50022 |
| Fitting position | vertical |
| Operating/Storage temperature | -45 to +70 °C (-49 to +158 °F) |
| Protection type/Protection class | IP54 / I (earthed) |
| Accessoires | screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
Part. No. |
Operating voltage |
Heating capacity* |
Inrush current max. |
Length (L) |
Weight |
Connection |
Approvals |
04700.0-00 |
110-240V AC/DC** | 10W | 1.0A | 50mm | 0.10kg | 3 x 0,5mm² x 300mm sheathed cable (silicone) |
VDE |
04701.0-00 |
110-240V AC/DC** | 20W | 2.5A | 60mm | 0.20kg | 3 x 0,5mm² x 300mm sheathed cable (silicone) |
VDE |
04702.0-00 |
110-240V AC/DC** | 30W | 3.0A | 70mm | 0.20kg | 3 x 0,5mm² x 300mm sheathed cable (silicone) |
VDE |
04700.9-00 |
110-120 V AC/DC | 10W | 1.0A | 50mm | 0.10kg | 3 x AWG 20 x 300mm sheathed cable | UL File No. E150057 |
04701.9-00 |
110-120 V AC/DC | 20W | 1.5A | 70mm | 0.20kg | 3 x AWG 20 x 300mm sheathed cable | UL File No. E150057 |
04702.9-00 |
110-120 V AC/DC | 30W | 1.5A | 100mm | 0.20kg | 3 x AWG 20 x 300mm sheathed cable | UL File No. E150057 |
*at 20°C ( 68°F) ambient temperature
**(min. 110V, max 265V) Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Dimensioned Drawing
Compact Fan Heater HGL 046
 |
|
Technical Data
| Heating element | resistance heater |
| Temperature safety cut-out | to protect against overheating in case of fan failure |
| Heater body | anodised extruded aluminium profile |
| Surface temperature | max. 75°C (400W) |
| Axial fan, ball bearing | Airflow, free flow |
| AC: 45m³/h (50HZ) or 54m³/h (60Hz) | |
| DC: 54m³/h | |
| service life 50 000h at 25°C (77°F) | |
| Connection | internal connection terminal 1.5mm² with clamping torque 0.8Nm max. |
| Connection casing | plastic according to UL94 V-0,black |
| Mounting | clip for 35mm DIN rail, EN 50022 |
| Fitting position | vertical |
| Operating/Storage temperature | -45 to +70 °C (-49 to +158 °F) |
| Protection type/Protection class | IP20 / I (earthed) |
Note: In the case of 24VDC and 48VDC the fan heater has to be switched via a relay. For this purpose we recommend our electronic relay SM 010 (Art. No. 01000.0-00 and 01001.0-00).
| Part No. | Operating voltage | Heating capacity | Length (L) | Weight (approx.) | Approvals |
| 04640.0-00 | 230VAC, 50/60Hz | 250W | 182mm | 1.10kg | VDE + UL File No. E150057 |
| 04641.0-00 | 230VAC, 50/60Hz | 400W | 222mm | 1.40kg | VDE + UL File No. E150057 |
| 04640.9-00 | 120VAC, 50/60Hz | 250W | 182mm | 1.10kg | VDE + UL File No. E150057 |
| 04641.9-00 | 120VAC, 50/60Hz | 400W | 222mm | 1.40kg | VDE + UL File No. E150057 |
| 04640.1-00 | 24VDC | 250W | 182mm | 1.10kg | - |
| 04640.2-00 | 48VDC | 250W | 182mm | 1.10kg | - |
| 04641.2-00 | 48VDC | 400W | 222mm | 1.40kg | - |
Dimensioned Drawing
PTC Fan Heater CR 027
 |
Telecommunications systems Automatic teller machines (ATM's) Access & Parking control systems Display Panels Personnel booths Ticket dispensers |
Technical Data
| Heating element | PTC resistor, self regulating and temperature limiting |
| Temperature safety cut-out | to protect against overheating in case of fan failure |
| Axial fan, ball bearing | Airflow see table |
| service life 50 000h at 25°C (77°F) | |
| Casing | plastic according to UL94 V-0, light grey |
| Optical indicator | thermostat control lamp |
| Connection | 2-pole clamp 2.5mm², clamping torque 0.8Nm max. |
| Mounting | clip for 35mm DIN rail, EN 50022 |
| Fitting position | vertical |
| Operating/Storage temperature | 0 to +60 °C (-32 to +140 °F) / -45 to +70 °C (-49 to +158 °F) |
| Dimensions | 100 x 128 x 165mm |
| Protection type/Protection class | IP20 / II (double insulated) |
| Approvals | UL File No. E204590 |
Art. No. |
Voltage |
(50Hz)* |
(60Hz)* |
Max. current (inrush) |
Axial Fan (ball bearing) |
Temperature Range |
Weight |
| 02700.0-00 | 220-240VAC, 50/60Hz | 475W | 550W | 11.0A | 35m³/h | 0 to +60°C | 0.90kg |
| 02701.0-00 | 220-240VAC, 50/60Hz | 550W | 650W | 13.0A | 45m³/h | 0 to +60°C | 1.10kg |
| 02700.9-00 | 100-120VAC, 50/60Hz | 400W | 550W | 14.0A | 35m³/h | +32 to +140°F | 0.90kg |
| 02701.9-00 | 100-120VAC, 50/60Hz | 510W | 650W | 15.0A | 45m³/h | +32 to +140°F | 1.10kg |
*at 68°F (20°C) ambient temperature. Also, power will vary when frequency other than listed is applied.
Dimensioned Drawing
Regulator and Monitoring |
|
Small, compact Thermostat KT 011
 |
|
Technical Data
| Switch temperature difference | 7K (± 4K tolerance) |
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Contact resistance | < 10mOhm |
| Service life | > 100 000 cycles |
| Max. switching capacity | 250VAC, 10 (2) A |
| 120VAC, 15 (2) A | |
| DC 30W | |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail, EN50022 (or for exit filter EF 118 Series) |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 60 x 33 x 43mm |
| Weight | approx. 40g |
| Fitting position | variable |
| Operating/Storage temperature | -20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to +176°F) |
| Protection type | IP20 |
| Setting range | Art. No. Contact breaker (NC) | Approvals |
| 0 to +60°C | 01140.0-00 | VDE |
| -10 to +50°C | 01142.0-00 | VDE |
| +20 to +80°C | 01159.0-00 | VDE |
| +32 to +140°F | 01140.9-00 | UL File No. E164102 |
| +14 to +122°F | 01142.9-00 | UL File No. E164102 |
| 0 to +60°C | 01146.9-00 | UL File No. E164102 |
Dimensioned Drawing
Small, compact Thermostat KT 011
 |
|
Technical Data
| Switch temperature difference | 7K (± 4K tolerance) |
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Contact resistance | < 10mOhm |
| Service life | > 100 000 cycles |
| Max. switching capacity | 250VAC, 10 (2) A |
| 120VAC, 15 (2) A | |
| DC 30W | |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail, EN50022 (or for exit filter EF 118 Series) |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 60 x 33 x 43mm |
| Weight | approx. 40g |
| Fitting position | variable |
| Operating/Storage temperature | -20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to +176°F) |
| Protection type | IP20 |
| Setting range | Art. No. Contact maker (NO) | Approvals |
| 0 to +60°C | 01141.0-00 | VDE |
| -10 to +50°C | 01143.0-00 | VDE |
| +20 to +80°C | 01158.0-00 | VDE |
| +32 to +140°F | 01141.9-00 | UL File No. E164102 |
| +14 to +122°F | 01143.9-00 | UL File No. E164102 |
| 0 to +60°C | 01147.9-00 | UL File No. E164102 |
Dimensioned Drawing
Dual Thermostat ZR 011
 |
|
Technical Data
| Sensor element | Thermostatic bi-metal |
| Maximum tolerance | +/- 7.2°F (4K) |
| Switching difference (hysteresis) | 12.6°F +/- 5.4°F (7°C +/- 4K) |
| Switching capacity (max. load) | NC: 10A resistive/2A inductive @ 250VAC |
| NO: 5A resistive/2A inductive @ 250VAC | |
| DC 30W | |
| Minimum load | 20 mA (all voltages) |
| EMI/EMC compliance | EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connections | 4-pole terminal for AWG 14 max. (2.5 mm²) |
| Mounting | Clip for 35mm DIN rail (EN50022) |
| Dimensions (H x W x D) | 2.6 x 2.0 x 1.8" (67 x 50 x 46 mm) |
| Housing | Plastic, UL 94V-0 |
| Weight | 3.2 oz (90 g) |
| Protection type | IP20 |
| Operating temperature | -4 to 476°F (-20 to 80°C) |
| Storage temperature | -49 to 158 °F (-45 °C to 70 °C) |
| Agency approvals | UL, CSA |
| Part No. | Setting range NC | Setting range NO | Setting range NO |
| 01172.0-01 | 32 to 140 °F | 32 to 140 °F | - |
| 01175.0-01 | 14 to 122 °F | 68 to 176 °F | - |
| 01172.0-00 | 0 to 60 °C | 0 to 60 °C | - |
| 01175.0-00 | -10 to 50 °C | 20 to 80 °C | - |
| 01176.0-00 | - | 0 to 60 °C | 0 to 60 °C |
| 01176.0-01 | - | 32 to 140 °F | 32 to 140 °F |
Dimensioned Drawing
24 VDC + 48 VDC Electronic Relay SM 010
 |
|
Technical Data
| Contact type | contact maker (Relay/MOSFET) |
| Contact resistance | < 10mOhm |
| Service life | > 100 000 cycles |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 6-pole terminal, clamping torque 0.5Nm max., rigid wire 2.5mm² |
| Mounting | clip for 35mm DIN rail, EN50022 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 46mm |
| Weight | approx. 85g |
| Fitting position | variable |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Protection type | IP20 |
| Approvals | VDE intended |
| Art. No. | Operating voltage | Max. switching capacity |
| 01001.0-00 | 24VDC (20-28VDC) | 28VDC 16A |
| 01000.0-00 | 48VDC (38-56VDC) | 56VDC 16A |
Dimensioned Drawing
FT 011 Tamperproof Thermostat
 |
FTS 011NO / closes on temperature rise (bluemodule housing) - for regulating filter fans, heat exchang-ers, cooling devices or for switching signal devices when temperature limit has been exceeded. |
Technical Data
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Contact resistance | < 20mΩ |
| Service life | > 100 000 cycles |
| Max. switching capacity | 10A resistive/ 2A inductive @ 120VAC |
| 5A resistive/ 1.6A inductive @ 240VAC | |
| DC 30W | |
| Max. inrush current | AC 10A |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 2-pole terminal for AWG 14 max.(2.5mm2), torque 0.8Nm max |
| Housing | plastic, UL 94V-0, light grey |
| Mounting | clip for 35mm DIN rail, EN60 715 |
| Mounting position | vertical |
| Operating temperature | -4 to +176°F(-20 to +80℃) |
| Storage temperature | -49 to +176°F(-45 to +80℃) |
| Dimensions | 1.85 x 1.3 x 1.3" (47x33x33mm) |
| Weight | approx. 23g |
| Protection type | IP20 |
| Part No. | Contact | Switch-off temperature | Switch-on temperature |
| 01160.0-00 | NC - open on rise | 59°F / 15°C (± 9°F / 5K tolerance) | 41°F / 5°C (± 9°F / 5K tolerance) |
| 01160.0-01 | NC - open on rise | 77°F / 25°C (± 9°F / 5K tolerance) | 59°F / 15°C (± 9°F / 5K tolerance) |
| Switch-on temperature | Switch-off temperature | ||
| 01161.0-00 | NO - close on rise | 122°F / 50°C (± 11°F / 6K tolerance) | 104°F / 40°C (± 12.6°F / 7K tolerance) |
| 01161.0-01 | NO - close on rise | 140°F / 60°C (± 11°F / 6K tolerance) | 122°F / 50°C (± 12.6°F / 7K tolerance) |
| 01161.0-02 | NO - close on rise | 95°F / 35°C (± 11°F / 6K tolerance) | 77°F / 25°C (± 12.6°F / 7K tolerance) |
Dimensioned Drawing
Inner temperature controller for switchgear cabinet
 |
|
Technical Data
- Bimetal sensor as heat sensitivity set to feedback of heat.
- Contact point scheme:single switchover contact point as instant switch component
- Allowed load of contact point
- KI.5-3 (Heating)
- AC10(4)¹ A
- DC=30W
- KI.5-4 (Cooling)
- AC 5(4)¹ A
- DC=30W
- (¹ )=sensitivity load at cosФ=0.6
- Adjusting range: +5℃ to +60℃
- Weight: appr. 105g
- Size: 71x71x33.5mm
- Switch discrepancy: 1K±0.8K
- Voltage scope is wide, any type could be used from 24V to 230V
- Time-saving connection, terminal block could be installed with screw fro outside.
- Easy installation, could be installed to 35mm din rail vertically or horizontally. according to EN50 022, it could be clipped to NS/35-ES cabinet profile with its accesory adapter
| Part No. | Rated voltage |
| JWF6011 | 230/115/60/48/24V AC 60/48/24V DC |
DC 24 V Electronic Thermostat ET 011
 |
|
Technical Data
| Switch temperature difference | approx. 3K |
| Sensor element | PTC |
| Contact type | change-over |
| Contact resistance | < 10mOhm |
| Service life | > 100 000 cycles |
| Max. switching capacity | 28VDC, 16A |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 5-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail, EN 50022 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 46mm |
| Weight | approx. 80g |
| Fitting position | vertical |
| Operating/Storage temperature | 0 to +60°C (+32 to +140°F) / -45 to +80°C (-49 to +176°F) |
| Protection type | IP20 |
| Approvals | - |
| Part No. | Operating voltage | Setting range |
| 01190.0-00 | 24VDC (20-28VDC) | 0 to +60°C |
Dimensioned Drawing
Mechanical Thermostat FZK 011
 |
|
Technical Data
| Switch temperature difference | 4K (± 1.5K tolerance)* |
| Sensor element | thermostatic bimetal |
| Contact type | change-over snap-action contact |
| Contact resistance | < 10mOhm |
| Service life | > 100 000 cycles |
| Max. switching capacity, NC | 250VAC, 10 (4) A |
| DC 30W | |
| Max. switching capacity, NO | 250VAC, 5 (2) A |
| DC 30W | |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 4-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail, EN50022 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 38mm |
| Weight | approx. 0.10kg |
| Fitting position | variable |
| Operating/Storage temperature | -20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to +176°F) |
| Protection type | IP20 |
| Approvals | - |
| *Connecting terminal "N" (RF heating resistor) causes the thermal feedback to work and so reduces the switch temperature difference to approx. 0.5K. | |
| Art. No. | Operating voltage* | Setting range |
| 01170.0-00 | 230VAC | +5 to +60°C |
| 01170.0-02 | 230VAC | -20 to +30°C |
* operating voltage 120VAC wit setting °F upon request
Dimensioned Drawing
Mechanical Hygrostat MFR 012
 |
|
Technical Data
| Switch difference* | 4% RH (±3% tolerance) |
| Permissible air velocity | 15m/sec |
| Contact type | change-over contact |
| Contact resistance | < 10mOhm |
| Service life | > 100 000 cycles |
| Min. switching capacity | 20V AC/DC 100 mA |
| Max. switching capacity | 250 VAC, 5 (1) A |
| DC 20W | |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 3-pole terminal for 2.5mm², clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail, EN50022 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 38mm |
| Weight | approx. 60g |
| Fitting position | variable |
| Operarting/Storage temperature | 0 to +60°C (+32 to +140°F) / -20 to +80°C (-4 to +176°F) |
| Protection type | IP20 |
| Approvals | VDE and UL submitted |
*at 50% RH
| Art. No. | Setting range |
| 01220.0-00 | 35 to 95% RH |
Dimensioned Drawing
Room Thermostat |
|
WH611
Features
-
1) Heating / Cooling control
2) Programmable function of 24 time sections per day and 7-day per week
3) 3 sets of permanent programs ( 2 sets of factory setting program and 1 set of self-setting program)
4) Pre-cooling or pre-heating function in automatic program
5) Backlight display (at 220V)
6) The temperature difference adjustable between off and on
7) Allowable to calibrate the temperature display;
8) Allowable to connect the external temperature sensor. Outdoor temperature display provided.
9) Display adjustable between room temperature, outdoor temperature and preset temperature.
10) Fan speed adjustable automatically or manually to control of no fan(WH611 WW), single-speed fan(WH612WW) or three-speed fan(WH614WW).
11) Display adjustable between ℃ and F.
12) Allowable to keep user settings after power shutdown.
13) Antifreeze (or energy-saving) when turn off.
14) Allowable to set the highest temperature of heating and the lowest temperature of cooling.
15) Three transmission modes for selection, i.e. wired, wireless or multi-channel transmission.
16) Multiple fault detection and display functions.
17) Energy-consumption display function
18) Allowed for wired / wireless installation in standard box(WH611 WW，WH612WW，WH614WW), or allowed to install on battery seat for wireless transmitting(WH611RF,WH611MRF).
Parameter
- Power: 220V AC (±10%) 50Hz / two LR6 1.5V alkaline batteries
- Range of temperature adjustment: 5÷35℃/39÷95°F
- Range of temperature display: 0÷40 0C/32÷104°F
- Temperature test frequency: Every minute
- Display accuracy: 0.1℃/1°F
- Probe sensor: NTC(100K) 1%
- Protection level: IP20
- Output Convertible: relay
- Contact capacity: 3A/250V (WH611WW, WH612WW, and WH614WW); 16A/250V (WH611RF); 5 A/250V (WH611MRF)
- Insulating condition: Normal environment
- Working environment temperature: -18÷50℃/0÷122°F
- Running program: Set per 1 week as a cycle
- Software level: A
- LCD display
- Minimum allowable time for increase / decrease in program setting: 1 hour
- Frequency: 433 MHz (WH611 RF/MRF)
- Wireless transmission distance: Indoor 16 / 50 m; outdoor 200m (WH611 RF/MRF)
- Size(mm): 77H*120W*14D
- Installation: Installed in standard box or on battery seat
Scope of Control Applications
-
1. Control of family air-condition and central air-condition;
2. Control of wall-mounted boiler
3. Control of Thermal Actuator or electromagnetic valve
4. Control of water pump;
5. Control of fan coil;
6. Ventilation control.
NTL-1000
Describing:
NTL1000 Cs is switch type breeze valve controller, apply in the control of the piping machine breeze tube breeze valve, make environment temperature in the place controled settle for set temperature.Temperature enactment. pulling out dish to point needle should set to settle temperature position for the needed.
Pull out to move a switch difference for:power switch;(open the ON － pass OFF)Circulate a mode switch.(the warm air HEAT - cold air COOL)
Characteristics:
+ The annoys a film box a feeling component.
+ Pull out dish greatly+pull out to move a switch, operate Chien clear.
+ Nicety spreading to move machine structure can protect a longevity life a work.
+86 standards install a dark box(60 mms), installing convenience.
Notice:
Inside place a temperature repair component, if have no zero lines(N) to connect to carry son on the 2nd, control influence accuracy.NTL-3000
Features:
-
The temperature control for LCD digital display for central air-conditioning room temperature controller, fashion aesthetic appearance, ultra-thin design, can be used to end the central air-conditioning fan coil control, can control the fan-coil of third gear wind speed, three-or second-line electric Valve, but also can control the electromagnetic valve or air valve.
| Rating Voltage | 220V AC/50Hz(±10%) | Size | 86mmX86mmX12mm(LxWxH) |
| Power | <1.5w | Crust Material | White PC engineering plastics flame retardant (Optional color) |
| Load Current | 3A (Resistive load) | Sensor | NTC |
| Accuracy | ±1℃ | Ambient Temperature | -5℃ - +50℃ |
| LCD can use symbols that form the relay contact output | Within 24 hours of regularly switch |
| EL backlight, infrared remote control optional | Correction room keys used direct measurements of temperature |
| Four wind speed mode settings: low, middle and high winds and automatically, the state will automatically show the actual wind speed work | With automatic (Manual) reset function |
| Anti-condensation feature, after the valve clearance to continue to run low 30 second wind (Fan controlled state) |
Fan site programming is controlled, restore electricity after a call or standby |
| Control Range: 5.0℃ - 35.0℃ Temperature resolution: 0.1℃ | Sleep running functionality, more comfortable, more energy-saving |
installation:
NTL-6000
Elegant European design
Can be mounted in combination with various types of light switches
Thermostat with setback mode type NTL-6000
- Recommended for control of underfloor heating and electrical heating.
- Electronic on/off control up to 3600W, 16A.
- Built-in setback mode for automatic comfort and setback temperature via timer.
- Flush mounting or wall mounting.
Technical Data
| Supply voltage | 230V +10/-15%, 50/60 Hz |
| Output relay SPST - type NTL-6000 | 16A, max. 3600W 14A, max. 3200W |
| Built-in interrupter | 1-pole |
| Temperature range | +5/+40°C |
| Setback mode (via remote timer) | 5°C |
| On/off differential | 0.4°C |
| Ambient temperature | 0/+50°C |
| Housing - type NTL-6000 |
IP 20 IP 21 |
| Sensor type - heating is switched off in case of sensor failure | NTC |
| Dimensions (H/W/D) | 80/80/50 mm |
NTL-2000
It can be used to the indoor temperature controlling of hotel.and home family with the features of novel outline and simple in stnxture,designed reliable and easy to install.
Contact capacity:6A/220V~50HZ
Operating range:10''''''''C~30''''''''C
Temperature sense
Component:Air-charged film case
Appendix:air speed gear,gear shifting
on temperature alternation
24 hours By fax & e-mail as below Tel:0086-577-62737672 Fax:0086-577-62737671 sunshine@sunshinele.com 24 hours response guaranteed! Your trustworthily & best partner in China!