Self-Adjusting Crimping Pliers For Cable Ferrules
| HSC8 6-4( after crimper is square) | HSC8 6-6( after crimper is hexagon) |
| It's applicable for tubular bare terminasl and pre-insualed terminal on non-welding connection complied with standard electrical connection. When crimping the terminal should be put into crimping pliers laterally. The demanded pressing force must be reached before the brake unit automatically release the jaw of the pliers. Thus high quality crimping standard could be ensured during repeatedly crimping. Due to perfect gripping position fixed and logical and light strcture and the handle shape design meeting human being engineering principle, it reduces fatigue degree. |
The design is unique due to light weight and saving energy. When crimping tightly, the gripping force would evenly transfer to all the section(4 or 6 spots) of crimping terminal. Because of reasonable design complied with human being engineering principle, the weight of the pliers is only 360g and the length of ther pliers body is only 175mm. |
 |
 |
   |
|
Model |
Range of Application |
Capacity mm2 |
AWG |
Length(mm) |
Weight(kg) |
HSC8 6-4 |
 Wir-end ferrules |
0.25-6.0 |
23-10 |
175 |
0.36 |
HSC8 6-6 |
0.25-6.0 |
23-10 |
175 |
0.36 |
| HSC8 16-4 | |
| It's applicable for tubular bare terminasl and pre-insualed terminal on non-welding connection complied with standard electrical connection. When crimping the terminal should be put into crimping pliers laterally. The demanded pressing force must be reached before the brake unit automatically release the jaw of the pliers. Thus high quality crimping standard could be ensured during repeatedly crimping. Due to perfect gripping position fixed and logical and light strcture and the handle shape design meeting human being engineering principle, it reduces fatigue degree. |
 |
Model |
Range of Application |
Capacity mm2 |
AWG |
Length(mm) |
Weight(kg) |
HSC8 16-4 |
Wir-end ferrules |
6.0-16.0 |
10-15 |
210 |
0.52 |
 |
HSC8 1-4/HSC8 2-4 |
| It's applicable for special terminals in 0.08-6mm2 on mon-welding connection complied with standard electric connection. When crimping, put the terminal in to the crimping pliers laterally. When the demanded pressing force is reached, the brake unit would release the crimping jaw automatically. Thus it could ensure high quality crimping standard during repeatedly crimping. |
Model |
Range of Application |
Capacity mm2 |
AWG |
Length(mm) |
Weight(kg) |
HSC8 1-4 |
 Harting |
0.08-2.5 |
28-6 |
175 |
0.36 |
HSC8 2-4 |
0.14-6.0 |
26-10 |
175 |
0.36 |